Feature:
1. Double PIR infrared sensors can effectively detect and reduce false alarms.
2. 113dB loud siren PIR motion detector alarm will sound a 30-second alarm when it detects a thief or thief.
3. Using automatic temperature compensation technology, it is easy to adapt to the environment.
4. Equipped with 2 remote controls for easy adjustment and use.
5. Low power consumption and long service life, suitable for homes, offices, schools, garages, etc.
Specifications:
Material: ABS
color: White
Alarm sound: 105dB
Remote control distance: 5~10m / 16.4~32.8ft
Detection distance: about 7m / 22.96ft
Working voltage: AC 220V (self-provided transformer is required), DC 6V (self-prepared by assembling 4 AA batteries)
Horizontal detection angle: 110°
Vertical detection angle: 35°
Size: about 12*9*4.5cm/4.72*3.54*1.77in
Other description:
1. Product introduction:
Brand new high-quality PIR infrared motion detector alarm device with 2 remote controls for home security.
2. Alarm operation method:
Press once with the remote control, the yellow light stays on for 20 seconds and then goes out. The host enters the armed state. At this time, there is any abnormality within the detection range. The red warning light of the host flashes 5 times to warn, and then the horn emits a high-pitched sound. Use the remote control to press the contact alarm, and the horn will stop after 30 seconds without disabling it.
3. Matters needing attention
① When the remote control distance is shortened, please replace the battery.
② When the battery is installed in the detector, check whether the battery leaks regularly.
③It is recommended that you regularly check whether the infrared alarm is working properly to avoid missing alarms.
④The detector should be protected from rain, wind, and sun exposure, and indoor heating sources such as air conditioners and stoves should be avoided to avoid false alarms.
⑤ When the power-on indicator is dark, the alarm sound becomes smaller, and the false alarm rate of the infrared alarm is high, the battery voltage is generally low, and the battery should be replaced in time.
4. Installation guide:
①. The probe should avoid directly facing the door window to avoid false alarms
②. The tilt angle of the detector should be adjusted to make the detection distance
③. The lens of the probe should be kept clean without obstructing objects
④. The probe should be far away from cold and heat sources, such as air conditioning outlets, heaters, air conditioners, etc.
⑤, turn on for 10 seconds to enter the alert state, and alarm for 30 to 50 seconds if someone is detected
⑥. Open the battery cover and install 4 AA batteries in accordance with the marks inside the battery box
⑦. When installing and using the probe, avoid direct sunlight and car lights, and consider the false alarm caused by the floating of curtains.
⑧. Install on the corner or wall. It is recommended to install the height 2 meters above the ground. Adjust the top view angle to prevent small animals from mistakenly.
⑨ Fix the remote control infrared alarm on the universal seat, and turn the infrared alarm to make it fit Installation requirements and detection needs are sufficient
Product List:
1*alarm, 2*remote control, 1*bracket
