125KHz / 13.56MHz Frequency NFC Smart Card Reader WriterRFID Copier / RFID Reader / RFID Writer / RFID Duplicator![RFID Copier Duplicator 125KHz Key fob NFC Smart Card Reader]()
Product Features1) Compliant with CCID2) Compliant with PC/SC3) Support IC/ID dual frequency replication4) Driver-free, no need to download software installation5) When connect the RFID Reader to the computer with the USB cable, then can find the software.6) Support ID125K, 8800, 5200, 4305, 5577, 8265 card.7) Support UID FUID CUID UFUID IC semi-encrypted card, IC full encryption card.8) Has USB full speed interface9) Two-color LED light prompt (red light is standby, green is working)10) Built-in buzzer "beep" sound reminder
Product Parameters:
Dimensions: 108 (L) X 68 (W) X 12 mm (H)
Interface: USB full speed
Working Voltage: 5 V DC
Working current: 200mA
Standby current: 50mA
Normal current: 100mA
Working frequency: 125KHz / 13.56 MHz
Smart card support: for 125KHz ID type: EM4100, TK4100, 8800, 5200, EM4305, T5577, 8265 etc.
For 13.56MHz IC type: UID FUID CUID UFUID IC Half-encryption, IC Full-encryption etc.
Supported operating systems: SupportWindows computer. Not support Linux, Mac.
How to use the card reader?
1) Connect the device to your computer with the USB cable.
2) You can find and open the software on your computer.
Read and write ordinary 125KHz RFID card
1. Place the card on the card reader and press "Read" on the software to scan the card.
2. The software will scan and display the card number
3. Place a writable T5577 (125KHz writable chip) on the card reader and press "Write" on the software.
Read and write 13.56MHz IC, IC half encryption card, IC full encryption card
1. Place the card on the card reader and press "Card number" or "Start decoding" on the software.
2. The software will scan and display the card number
3. Place a writable UID (13.56MHz writable chip) on the card reader and press "Write Card" on the software.
Product Details
Light weight body, Mini Design
ABS flame-retardant material casing, small and light, the interior is controlled by high-quality microchip, and the card reading effect is fast.
LED indicator light / buzzer
The LED indicator light is red under standby mode, and it's green under the card reading status. Built-in buzzer, very convenient for effective prompts.
Anti-slip mat at the bottom
The bottom is made of a sponge mat, and the inside of the sponge is a removable screw.
USB full speed and efficient
1.2m long USB transmission cable, fast response. No need to install the driver, quickly read the card number
Built-in mobile disk with software, plug and play
Connect the RFID reader to your computer with the USB cable, then can find the software
Hot Question:1) Where can i download the software?
Answer: You can download the software via this link://www.nsccn.com/download/soft/nfc/nfcPro_wbw.exe2) Which chip inside in the 5pcs blue keyfobs and 5pcs white cards?Answer: If you buy the RFID copier + 5pcs UID keyfobs + 5pcs T5577 cards. The 5pcs UID keyfobs is working with 13.56MHz frequency, used to copy the MF 1k card. The 5pcs T5577 cards is working with 125KHz frequency, used to copy the EM4100, TK4100 cards. They are different type card.3) Why the 5pcs cards in the package read failure?Answer: Please don't worry, these 5pcs white cards is T5577 (EM4305) type, they haven no data before write. They will can be read successfully after finished written from your TK4100 or EM4100 type card. Thank you.
I just love the product because of how usefull it is, but it doesnt work for types like: a credit card or a gym card (works with some gym cards)
The goods came quickly well packed. Seller recommend. How to check the performance will be unwritten.
Very good product, saved us a lot of convenience
125Hz clones good. Decoding or other action I didn't do yet. Excellent quality until now
Shipping fast card key copy very well. Programmable instructions also difficult without being in an instant four yo. Strongly recommend
The program, the link to which is recorded in the device does not work!, download you need the one that is listed in the description
Works fine. Corresponds to the description
Danke
RFID yes, NFC No, well, in general, such, a toy at a time. In principle, for their money norms.
Seems to be working.
Great thing! Paid off immediately when cloning cards for access to the kindergarten. Round labels also reads and writes. Ordered a RFID ring, I will check. I'll add a review as it comes
Крутой девайс, на копировал новым сотрудникам пропусков!
херня полная не покупайте
good
Delivered by schvidko. The card is 125Hz zdublyuvav reviews. PZ is normal on Windows 8.1-10. Selling to my uncle.
It works well.
very good