ZX908 Mini 4G GPS Tracker CAT1 PCBA Chip Board For Vehicle Car Person Tracking System Wireless WIFI Beidou Satellite Locator
Mini size: 25*35*3.8mm , support both: 4G networks
Main specification:
Attention:
1.Note: This is 4G GPS tracker --
4G Bands : LTE-FDD:B1/B3/B5//B7/B8/B20 , LTE-TDD:B34/B38/B39/B40/B41
Have tested in Europe and Asia, working successfully. Other Continents , please confirm with your country telecom operator, support the 4G bands above
2.The Topin Official Service platform: www.365gps.net
Android application: 365gps
iOS application: 365gps
Login ID:IMEI number,Default Password: last 6digits of imei
3. QR code scanning access
The client for the Android and iOS phones can be downloaded after the QR code has been scanned.
Please feel free to ask test ID experience our APP.
Please contact us to get test ID and password experience our APP, thanks.
Product function
Multiple Positioning Mode: GPS+ AGPS+LBS+Wifi+BDS
4G Bands: LTE-FDD:B1/B3/B5/B7/B8/B20 , LTE-TDD:B34/B38/B39/B40/B41
Track: The user's specific location can be inquired through the cell phone APP or the computer
Fence: Designate an area on the map by setting the device as the center point and the alarm will be triggered off immediately once the user of the device goes into or out of this area
PlayBack: Inquire the moving routes of the device in the past 3 months anytime and anywhere
Remote Power-off: The device can be turned off through the APP on the guardian's cell phone
Remote Restart: The device can be restarted through the APP on the guardian's cell phone
Intelligent Power Saving: The device turns off/on the GPS and data upload in the time range specified through the APP on the guardian's cell phone
Contacts: save three SOS numbers, the device will call the numbers if long press SOS button.
SMS comands :
1. IMEI query: IMEI#
2. Interval setting:
TIMER,X,Y# (X=GPS tracker moving status interval, Y=GPS tracker idle status
interval)
3. Interval query:
TIMER#
4. Sleeping time
setting: SENDS,X# (x=minutes, range 0-60)
5. Static time
setting: STATIC,X# (x=seconds, can not exceed the sleeping time)
6. Reboot: REST#
(Device will reboot after 5 seconds)
7. Power off:
POWEROFF# (can be power on manually or by recharging only)
8. APN setting:
APN,X,Y,Z# (X=SIM card apn parameter, Y=SIM card APN user name, Z= SIM card APN
password)
9. Factory restore:
FACTORY#
Package includes:
1 X GPS Tracker PCBA with all antennas ( without battery, need to weld 3.7V battery to power the PCBA by self, no microphone )
1 X Use manual
1 xZX905 GPS Tracker
Manual doesn't list what all 3 LEDs blinking slowly, at the same time means. Come to find out (from other posters on here complaining about it) that you have to solder a LiPO battery to it for it to even begin to work. Soldered a LiPO 3.7v rechargeable battery to it - so far, all 3 LEDs still blink (battery probably needs a better solder-job). Will re-solder and see. Doesn't mention it requires a LiPO battery to operate anywhere. Finally, it does NOT have a USB-C port as the Specifications say - it has a microUSB port ONLY. P.S. It wouldn't kill the seller to post some protocol information and low-level software/firmware details or even compatibility with Traccar. As is usually the case, it just falls short of being an amazing product and sale because someone just didn't want to take the time to try to do their job the best they can do it, and instead focus on how many they can cram out the door. (Pro-tip: If you try hard at your job, you'll naturally sell more than everyone else)
Good device, i recomand, good module.
Good product. My first trials failed, only usb connected. Seems you have to solder a lipo battery to it. I cannot see that in the manual. But I have such batteries, and once soldered everything worked. Seems battery gets charged when usb connected, good. I am happy so far. For swiss customers: tested with digital republic sim.
Arrived well protected, now it is necessary to try arrived quickly.
Product as per the ANNOUNCEMENT!!! Now it's putting it to work!!!
To insert the sim card drag the lid.